Analog Devices ADIS1700 Series, User Manual

Page: 112 / 121

Table 7-157: Write Section Command - Payload
Field Name Type Notes
Section ID U4 Section ID to write
Offset U4 Relative offset with respect to the section start
Size U4 N
× N Data U1
Table 7-158: Write Section Response- Header
Field Name Type Notes
Module ID U1 0x40
Reserved1 U1 NV storage medium ID
Command ID U2 0x23
Version U4 1
Reserved2 U4 0
Payload Size U4 12 + Size
Result Status U4 0
Table 7-159: Write Section Response - Payload
Field Name Type Notes
Section ID U4
Offset [sectors] U4
Size [sectors] U1 Number of sectors N; where N cannot exceed 8
× M U1 M ≤ N × Sector size. The missing bytes are inter-
preted as zero.
Validate Section
The Validate Section command contains the content size, version, and CRC of the section. The following rules ap-
ply:
•
It is applicable to all sections except the data section
•
It is applicable only to invalid sections (cleared using the clear section command)
•
If the verification of the CRC on the expected memory size within the section passes, then all the remaining
bytes are set to 0. The version and size are stored in the table of the section and the section is declared valid.
•
For code sections, the
Content Version
is the software version
Storage Module Messages
ADIS1700x Vision-Sensing Camera Module User Guide 7–63