EVAL-ADGM1004EBZ User Guide
UG-1078
One
Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluating the
ADGM1004
0 Hz/DC to 13 GHz, 2.5 kV HBM ESD, SP4T, MEMS Switch
with Integrated Driver
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 11
FEATURES
Single-supply voltage: 3.3 V
Wide frequency range
SMA connectors for RF signals
SMB connectors for switch control signals
On-board CALIBRATION THRU transmission line for analyzer
calibration
EVALUATION KIT CONTENTS
EVAL-ADGM1004EBZ
evaluation board
ONLINE RESOURCES
ADGM1004
data sheet
EVAL-ADGM1004EBZ
user guide
ADDITIONAL EQUIPMENT NEEDED
3.3 V dc power supply
Vector network analyzer (VNA)
GENERAL DESCRIPTION
This user guide describes the
EVAL-ADGM1004EBZ
evaluation
board for the
ADGM1004
, a dual-chip, radio frequency (RF)
switching solution containing a single-pole, four-throw (SP4T),
microelectromechanical systems (MEMS) switch, and a control
chip copackaged in a compact, 5 mm × 4 mm, LFCSP package.
The SP4T switch uses Analog Devices, Inc., MEMS switch tech-
nology, providing optimum performance in terms of bandwidth,
power handling capability, and linearity for RF applications. The
control chip generates the high voltage signals needed for the
MEMS switch and allows the user to control its operation through
a simple and flexible complementary metal-oxide semiconductor
(CMOS)/low voltage transistor-transistor logic (LVTTL) compliant
parallel interface.
The
EVAL-ADGM1004EBZ
comes fitted with connectors for RF
and control signals as well as links to control the operation of the
switch and evaluate its performance.
For full details on the
ADGM1004
, see the
ADGM1004
data sheet,
which should be consulted in conjunction with this user guide
when using this evaluation board.
EVAL-ADGM1004EBZ
CONNECTION DIAGRAM
50Ω
50Ω
50Ω
RFC
RF1
NETWORK ANALYZER
+
–
+ –
POWER SUPPLY 3.3V DC
15240-
001
Figure 1.
