background image

DVB Service

83

Vision

2

 Operation/Reference Guide

Scanning for Available Channels

Perform these steps to scan for available channels on all frequencies:

1.

Select 

Configure DVB

 from the DVB Service Menu on the left pane of the window. The Configure DVB 

Service page appears (FIG. 75).

2.

Select the tuner you want to use from the 

Tuner Hardware

 options menu, and click 

Apply

.

3.

Enter the IP address you want to scan in the Address field. This IP address should be the multicast 
address of the applicable transmitter.

4.

Enter the port you want to scan in the Port field.

5.

Click 

Start

. Vision

2

 begins to scan for available channels. Any channels it finds appear in the channels 

section at the bottom of the page.

Multicast Settings

The following options are available in the multicast section:

Setting the Multicast Address

Perform these steps to set the multicast address:

1.

Select 

Configure DVB

 from the DVB Service Menu on the left pane of the window. The Configure DVB 

Service page appears (FIG. 75).

2.

Use the 

Network interface to multicast on

 options menu to indicate which network interface you want 

to use for multicasting.

3.

Enter the base multicast address in the Base Multicast Address field. All channels selected to multicast 
are offsets from this address.

4.

Enter the port for this channel in the Port field.

5.

Enter a value for the multicast TTL for this channel in the TTL field. This step is optional.

6.

In the Channels area, click the check box in the Multicast column for the channel you want to multicast. 
This step changes the multicast value of the channel from false to true. A confirmation pop-up appears. 
Click 

OK

 to accept this change. Repeat this step for each channel you want to multicast.

7.

Click 

Apply

.

FIG. 79  

Multicast Settings

Multicast Options

Network Interface

Use this setting if the server has multiple network cards and you want to 
specify which one is used. This setting does not normally require changing.

Base Multicast Address

All of the channels selected to multicast will be an offset from this address. For 
example, if the Base Multicast Address is 234.0.0.0, the first channel on the list 
is multicast on 234.0.0.0, and the second 234.0.0.1, etc.

Port

This is the multicast port number to be used.

TTL

This is the multicast TTL value. You can enter a value in the space provided.

Summary of Contents for Vision 2

































































































































Reviews: