AMX Vision 2, Operation/Reference Manual

Page: 43 / 128

Installation
33 Vision
2
Operation/Reference Guide
Using the Remote Control
The set-top box includes a universal remote control you can use to control your video display and navigate
through the Vision
2
menus. Not all buttons on the remote work with your Vision
2
setup. While Vision
2
supports Video on Demand, you can use only the Play, Pause, Stop, Fast-Forward, and Rewind features.
FIG. 29 highlights some of the buttons you can use with Vision
2
and your set-top box.
FIG. 29 Amino Remote Control
Volume control
Play
Pause
Stop
Power
Navigational buttons for manuvering
through the Vision
2
menus
Menu button for accessing
the Vision
2
menu
Turn on Subtitles
Subtitles are only supported on DVB streams.
If you are using an STB-04 set-top box and you receive a "failed to load webpage"
error, select the OK button on the remote and, using the remote, power the set-top
box off and on again. Afterward, the Vision
2
main menu loads.