Installation Guide
Vision
2
Dealer Demo Systems
Overview
Vision
2
is a sophisticated, fully-integrated video capture, management, and broadcast
system for organizations and homeowners wanting a comprehensive, yet simple-to-use
IP video delivery solution.
Vision
2
offers live, scheduled, or on-demand video, all managed from a convenient web
interface. Through the web interface, you can perform the following:
•
Capture and encode content
•
Upload, archive, manage, and publish content
•
Schedule programming with a dynamic online program guide
•
Broadcast at selectable bitrate to any platform
•
Provide live TV and video on-demand over Intranet to any desktop/display
The V2-DLR-DEMO-1RU Dealer Demo System (
FG3100-D1K
) provides one live
MPEG channel and one live Digital Video Broadcasting - Terrestrial (DVB-T) multiplex
for up to 10 users over a standard IP network.
The Dealer Demo Solution includes:
•
1 Vision
2
Dealer Demo Server
•
2 Live DVB-T multiplexes
•
2 Live MPEG streams
•
1 Producer Channel (MPEG)
•
1 Record Channel (MPEG)
•
1 Archive (up to 2 VoD users)
The V2-DLR-DEMO-SFF Dealer Demo System (
FG3100-D2K
) provides two live MPEG
channels and two live Digital Video Broadcasting - Terrestrial (DVB-T) multiplexes for up
to 10 users over a standard IP network.
The Dealer Demo Solution includes:
•
1 Vision
2
Dealer Demo Server
•
1 Live DVB-T multiplex
•
1 Live MPEG stream
•
1 Producer Channel (MPEG)
•
1 Record Channel (MPEG)
•
1 Archive (1 VoD user)
Note:
On the V2-DLR-DEMO-SFF system, only one service running at a single time is
supported.
The Producer channel allows scheduling for timed playback of prerecorded video
content via multicast on private networks or the web.
The following table lists the specifications for the V2-DLR-DEMO-SFF Dealer Demo
Server:
The following table lists the specifications for the V2-DLR-DEMO-1RU Dealer Demo
Server:
Installation
The following steps show you how to setup a typical configuration for the Dealer Demo
Systems.
1.
Connect the power supply to the rear of the Dealer Demo server.
2.
Connect an RJ-45 LAN cable to LAN port one on the back of the Dealer Demo
server. See FIG. 2 and FIG. 3 for connection locations for each type of Dealer
Demo server. Connect the other end of the cable to a Gigabit port on a layer 3
network switch.
Note:
Vision
2
uses typical Cat5/5e/6 cabling for RJ-45 connections.
Note:
The V2-DLR-DEMO-SFF system only has one RJ-45 LAN connection.
FIG. 1
Vision
2
Dealer Demo Server
V2-DLR-DEMO-SFF Dealer Demo Server Specifications
Power:
100-240VAC, 1.5A, 50/60Hz
90W (20V, 4.5A) AC Adapter
Enclosure:
SECC with black matte finish
Front Panel Components:
Status
Blue LED indicates power status
Power Switch
Turns power on/off.
USB ports
2 Type-B USB 2.0 ports for connecting USB mouse and key-
board
Rear Panel Components:
Power connector
90W (20V, 4.5A) AC Adapter
Input Voltage AC 100-240V
Note:
Isolate IT Power System Connection.
USB ports
4 Type-B USB 2.0 ports
LAN port
RJ-45 LAN port provides Gigabit Ethernet communication
Audio Out
Provides stereo audio output
Note:
The Audio in (blue) and Microphone (red) connectors are
not used.
Serial Port
Provides serial control over devices which support RS-232
commands.
HDMI Video Out
Provides HDMI video output to the display, via an HDMI cable.
VGA Video Out
Provides VGA video output to the display
e-SATA
Reserved for future use
Dimensions (HWD): 6 9/16" (16.6 cm) H x 1 7/8" (4.8 cm) W x 6 7/16" (16.4cm) D
V2-DLR-DEMO-SFF Dealer Demo Server Specifications (Cont.)
Weight:
2.85 lbs (1.3 kg)
Operating
Environment:
• Operating Temperature: 0º C to 50º C (32º F to 122º F)
• Storage Temperature: -30º C to 60º C (-22º F to 140º F)
• Relative Humidity: 90% RH (45º C non-condensing)
V2-DLR-DEMO-1RU Dealer Demo Server Specifications
Processor:
One Quad-Core Intel
®
Xeon
®
3420 series processor
Memory:
2GB Memory (2x1GB), 1066MHz Single Ranked UDIMM
Storage:
250GB 7.2k RPM Serial ATA 3Gbps 3.5-in Cabled Hard
Drive-Entry
Power:
Single cabled power supply (250W)
Front Panel Components:
USB ports
2 USB 2.0 ports for mouse, keyboard, or external peripheral
devices
Video connector
1 15-pin (female) video connector for connecting a video output
device such as a PC monitor
Rear Panel Components:
Serial connector
1 9-pin (male) serial connector
Video connector
1 15-pin (female) video connector for connecting a video output
device such as a PC monitor
USB ports
2 USB 2.0 ports for mouse, keyboard, or external peripheral
devices
LAN connectors
2 RJ-45 LAN ports for connecting to a network router
(10/100/1000 Ethernet)
Rack Mount
Sliding Ready™ rails with Cable Management arm
Dimensions (HWD): 1 11/16" (4.24cm) x 17 1/8" (43.43cm) x 15 1/2" (39.37cm)
Weight:
17.76 lbs (8.058 kg)
Operating
Environment:
• Operating Temperature: 10º C to 35º C (50º F to 95º F)
• Storage Temperature: -40º C to 65º C (-40º F to 149º F)
• Operating Relative Humidity (non-condensing twmax=29º C):
20% to 80% non-condensing
• Maximum humidity gradient: 10% per hour, operational and
non-operational conditions
• Storage Relative Humidity: 5% to 95% non-condensing
(twmax=38º C)
FIG. 2
V2-DLR-DEMO-SFF Dealer Demo Server (rear-view)
FIG. 3
V2-DLR-DEMO-1RU Dealer Demo Server (rear-view)
LAN port
To Video LAN
To Client-side LAN
