Installation Guide
PS-POE-AF
PoE Injector
Overview
The PS-POE-AF (FG423-80) is a Power-over-Ethernet (PoE) power supply
with integral DC Injector (FIG. 1). It provides DC power for one PoE-
equipped device by "Injecting" DC power through the CAT5 ethernet cable.
The PS-POE-AF supports the IEEE standard PoE pinout:
Pins 4&5 Power (+) / Pins 7&8 Power (-). See
Pin Connections
(on reverse)
for details.
Key features include:
•
Power over Ethernet (PoE)
•
10/100/1000 (MbPS) Data Rates
•
Self-contained Injector
•
100-240VAC Universal Input
•
Desktop Style / Non-vented Case
•
IEEE802.3af Compliant Detection, Disconnect, Overload and Over
Voltage Control Function
•
Load Diagnostic LED
•
UNH IOL Test Report
•
Over Load Shutdown and Short Circuit Protection
•
Regulated Output With Low Ripple
•
Meets Safety Agency Requirements
•
Complies with EMI/RFI Regulations
Product Specifications
FIG. 1
PS-POE-AF Power-Over-Ethernet Power Supply
PS-POE-AF Specifications
Input Specifications
AC Input Voltage Range
100-240VAC -10%, +6%
Line Frequency
47-63Hz
AC Input Current
0.6A MAX at 90 VAC + Full Load
Protection
• Internal Primary Current Fuse
• Inrush Limiting
Input Power Cord
50 mm IEC power cord terminated with a
grounded Edison plug for AC input
PS-POE-AF Specifications (Cont.)
Output Specifications
Output Voltage
48 VDC Nominal
Output Current
0.3125 A Max
Combined Line and
Load Voltage Regulation
Excluding Cord ±1%
Ripple and Noise
1% Vp-p Max
Transient Response
• 0.5ms for 50%
• Load Change Typical
Protection
• Foldback Overcurrent Protection
• Short Circuit Protection
Power Indicator
LED indicates the presence of DC on the
output
General Specifications
Topology
• Switching-Fixed
• Frequency Flyback
Dielectric Withstand
• Primary-Secondary 3000VAC, 4250VDC
• Secondary-Ground 500VDC
Spacing
5mm Primary-Secondary
Leakage Current
Less than 250 uA
Efficiency
• 65% Typical @ Max. Load
• 120VAC/60 Hz
Weight (excluding cord)
7 oz (200 g)
Dimension (HWD)
• 5 1/4" x 2 1/8" x 1 7/16"
• 13.3 cm x 5.4 cm x 3.6 cm
Case Material
Black 94V0 Polycarbonate
Cord and Connectors
Dual RJ45 jacks built into the enclosure
EMC Information
FCC
• Part 15 Class B
• EN55022 Class B
Immunity
ESD: EN61000-4-2
RS
EN61000-4-3
EFT
EN61000-4-4
Surge
EN61000-4-5
CS
EN61000-4-6
Voltage Dip
EN61000-4-11
Harmonic
EN61000-3-2
CE
CE Compliant
Hold-up Time
• @120VAC 10ms min. typ.
• @240VAC 40ms min. typ.
Storage Temp
-30° C to +85° C
Approvals and
Standards - Safety
• cULus: UL/CSA60950
• TUV: EN60950
• CE: LVD, EMCD
MTBF
100,000 Calculated Hours
Environmental Specifications
Thermal Performance
• 32°F to 104°F (0°C to 40°C)
• No Derating
• Convectional Cooling
• Non Vented Case
Relative Humidity
Non-Condensing 5% to 95%
Altitude
0-10,000 feet
