Overview
21
Instruction Manual - NXA-ENET8-POE+
Link Layer Discovery Protocol
LLDP is used to discover basic information about neighboring devices within the local broadcast domain. LLDP is a Layer 2 protocol
that advertises information about the sending device and collects information gathered from neighboring network nodes it
discovers.
Advertised information is represented in Type Length Value (TLV) format according to the IEEE 802.1ab standard, and can include
details such as device identification, capabilities and configuration settings. Media Endpoint Discovery (LLDP-MED) is an extension
of LLDP intended for managing endpoint devices such as Voice over IP phones and network switches. The LLDP-MED TLVs advertise
information such as network policy, power, inventory, and device location details. The LLDP and LLDP- MED information can be used
by SNMP applications to simplify troubleshooting, enhance network management, and maintain an accurate network topology.
System Defaults
The switch’s system defaults are provided in the configuration file “Factory_Default_Config.cfg.” To reset the switch defaults, this
file should be set as the startup configuration file. The following table lists some of the basic system defaults.
NXA-ENET8-POE+ System Defaults
Function
Parameter
Default
Console Port Connection
Baud Rate
115200 bps
Data bits
8
Stop bits
1
Parity
none
Local Console Timeout
600 seconds
Authentication and Security
Measures
Privileged Exec Level
Username: admin
Password: admin
Normal Exec Level
Username: guest
Password: guest
Enable Privileged Exec from Normal Exec
Level
Password: super
RADIUS Authentication
Disabled
Authentication
Disabled
802.1X Port Authentication
Disabled
MAC Authentication
Disabled
HTTPS
Enabled
SSH
Disabled
Port Security
Disabled
IP Filtering
Disabled
DHCP Snooping
Disabled
IP Source Guard
Disabled (all ports)
Web Management
HTTP Server
Enabled
HTTP Port Number
80
HTTP Secure Server
Enabled
HTTP Secure Server Port
443
SNMP
SNMP Agent
Enabled
Community Strings
“public” (read only)
“private” (read/write)
Traps
Authentication traps: enabled
Link-up-down events: enabled
SNMP V3
• View: defaultview
• Group: public (read-only); private (read/write)
Port Configuration
Admin Status
Enabled
Auto-negotiation
Enabled
Flow Control
Disabled
Port Trunking
Static Trunks
None
LACP (all ports)
Disabled