Quick Start Guide
NXC-REL10
Relay Control Card
NetLinx Control Cards and NetModules
NetLinx Control Cards can be installed in either the NXF CardFrame, or
NetModules. This document provides basic specifications and wiring
information for the NetLinx Control cards. For detailed information on the
cards, refer to the
NetLinx CardFrame, Control Cards, and NetModules
Instruction Manual.
NXC-REL10 Specifications
The NXC-REL10 Relay Control Card provides ten relays supporting
devices that employ simple momentary or latching contact-closure control,
with LED feedback.
Pinouts and Functions:
NXC-REL10 Channel Assignments:
Channels 1-10 represent relays 1-10.
NXC-REL10 Connections/Wiring:
The NXC-REL10 Control Card has 10 relays that are independently
controlled and electrically isolated. The relay contacts are rated for a
minimum of 1A @ 0-24VAC or 0-28VDC (resistive). Jumpers located on the
Card allow you to select Normally Open (NO) or Normally Closed (NC)
contact settings:
NXC-I/O10 Specifications
Power Requirements:
200 mA @ 12 VDC
Operation:
Relay 1-10: ten relays, 1A, 28VAC / 24VDC
LEDs:
Ten red LEDs light to show ON status activity for each relay.
Wiring:
• Two 10-pin 3.5 mm captive-screw terminals
• Commoning strip (metal)
Models:
• NXC-REL10 Relay 10 Card
• NXM-REL10 Relay 10 NetModule
NXC-REL10 Pinouts and Functions
Pin
Function
Pin
Function
1
Relay 1A
11
Relay 6A
2
Relay 1B
12
Relay 6B
3
Relay 2A
13
Relay 7A
4
Relay 2B
14
Relay 7B
5
Relay 3A
15
Relay 8A
6
Relay 3B
16
Relay 8B
7
Relay 4A
17
Relay 9A
8
Relay 4B
18
Relay 9B
9
Relay 5A
19
Relay 10A
10
Relay 5B
20
Relay 10B
Normally open (NO) mode setting on jumper
pins 1 and 2 (default).
Normally closed (NC) mode setting on jumper
pins 2 and 3.
