AMX DVX-21XXHD Webconsole & Programming Manual Download

Page: 97 / 116

Terminal (Program Port/Telnet) Commands

NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide

Terminal Commands (Cont.)

Command

Description

SHOW AUDIT LOG

Displays the User Account Access Audit Log.
Example:

SHOW AUDIT LOG

08-24-2009 06:54:04 <TERMINAL> administrator TERMINAL LOGIN_SUCCESS

08-24-2009 07:05:30 <TERMINAL> administrator TERMINAL LOGIN_SUCCESS

09-04-2009 09:21:09 <TERMINAL> administrator TERMINAL LOGIN_SUCCESS

09-04-2009 09:25:49 192.168.220.171 administrator HTTPS LOGIN_SUCCESS

09-04-2009 09:35:55 192.168.220.171 administrator HTTPS LOGOUT

09-08-2009 06:07:46 192.168.220.171 administrator SSH LOGIN_SUCCESS

09-08-2009 06:07:55 192.168.220.171 administrator SSH LOGOUT

09-08-2009 07:44:29 192.168.220.171 administrator HTTPS LOGIN_FAIL

09-08-2009 07:44:44 192.168.220.171 administrator HTTPS LOGIN_SUCCESS

09-08-2009 07:45:25 192.168.220.171 administrator HTTPS LOGOUT

Each record displays:
• Date and time of access,
• Connection source consisting of either

or the IP address of the user,

• Account username,
• Access transport mechanism (

TERMINAL

HTTP

HTTPS

TELNET

SSH

)

• Activity (

LOGIN_SUCCESS

LOGIN_FAIL

LOGOUT

Note: Records older than 90 days will be automatically purged.

The entire database of audit records can be purged manually from Telnet/SSH/terminal session

using the "

CLEAR AUDIT LOG

" command (see page 87).

SHOW BUFFERS

Displays a list of various message queues and the number of buffers in each queue
Example:

show buffers

Thread TX RX Queued

----------- ---- ---- ----

Axlink 0

UDP 0 0-Sent=NO Waiting=NO

IPCon Mgr 0

Con Manager 0

Interpreter 0

Device Mgr 0

Diag Mgr 0

Msg Dispatch 0

Cfg Mgr 0

Route Mgr 0

Notify Mgr 0

---- ---- ----

Total 0 0 0 GrandTotal 0

Note: See the SHOW MAX BUFFERS

section on page 99

SHOW COMBINE

Displays a list of devices, levels, and channels that are currently combined.
Example:

> SHOW COMBINE

Combines

--------

Combined Device([33096:1:1],[96:1:1])

Combined Level([33096:1:1,1],[128:1:1,1],[10128:1:1,1])

Combined Device([33128:1:1],[128:1:1],[10128:1:1])

SHOW DEVICE <D:P:S>

Displays a list of devices present on the bus, with their device attributes.
Example:

>SHOW DEVICE [0:1:0]

Local devices for system #1 (This System)

----------------------------------------------------------------------------

Device (ID)Model (ID)Mfg FWID Version

00000 (00256)NXC-ME260/64M (00001)AMX Corp. 00336 v3.00.312

(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,

Physical Address=NeuronID 000531589201

(00256)vxWorks Image (00001) 00337 v3.00.312

(PID=0:OID=1) Serial=N/A

(00256)BootROM (00001) 00338 v3.00.312

(PID=0:OID=2) Serial=N/A

(00256)AXlink I/F uContr(00001) 00270 v1.03.14

(PID=0:OID=3) Serial=0000000000000000

Summary of Contents for DVX-21XXHD





















































































































Search results

Summary of Contents for DVX-21XXHD

Reviews:

Related manuals for DVX-21XXHD

Brands by name

Popular brands

AMX DVX-21XXHD, Webconsole & Programming Manual

Search results

Summary of Contents for DVX-21XXHD

Reviews:

Related manuals for DVX-21XXHD

Brands by name

Popular brands