21
USER MANUAL
DCP-SRX
2) Volume & Mute
The Volume & Mute section is to adjust volume level (through the horizontal volume
meter) and mute/unmute (through the Mute button) the audio output signal.
Control
The Control sub-menu is used to perform the following functions:
• CEC Controller
• RS232 Controller
• RS232 Pass-through
1) CEC Controller
DCP-SRX is embedded with a CEC controller and will automatically power on/off the
display connected to its HDMI OUT port when CEC Auto Control is switched on.
Above all, for CEC control of DCP-SRX to be effective, the display connected should
support CEC over HDMI.
CEC Auto-Control ON/OFF: Click to enable or disable CEC Auto Control. When
enabled, the DCP-SRX will send a CEC command to turn off the display connected
to HDMI OUT when there’s no signal present after a defined Delay Time or turn it
on immediately when there’s active signal.
Delay Time (min): Set the delay time of turning off the display after it receives CEC
command from DCP-SRX. The time is 0 - 30 minutes.
CEC Manual Control: Click to turn on or off the display manually.
