10
USER MANUAL
DCP-SRX
6. APPLICATION & INSTALLATION
6.1 Typical Application
DCP-SRX is normally used with DCP-MTX 4K HDBaseT Daisy-Chain Presentation
Switcher and supports cascade connection of multiple DCP-SRXs and DCP devices.
To install multiple DCP-MTXs and DCP-SRXs, simply connecting HDBT OUT of DCP-
MTX/DCP-SRX to HDBT IN of next DCP-MTX/DCP-SRX, you will get a Chain Mode
connection. By connecting the last DCP device back to the first through HDBT, you will
get a Ring Mode system. (see application example below).
DCP-MTX 1
DCP-MTX 2
DCP-SRX 1
DCP-SRX 2
SOURCE 1
SOURCE 2
DCP-MTX N
SOURCE N
DISPLAY 1
DISPLAY 2
HDBaseT
HDBaseT
HDBaseT
HDBaseT
DCP-SRX N
DISPLAY N
HDBaseT
Chain Mode
DCP-MTX 1
DCP-MTX 2
DCP-SRX 1
DCP-SRX 2
SOURCE 1
SOURCE 2
DCP-MTX N
SOURCE N
DISPLAY 1
DISPLAY 2
HDBaseT
HDBaseT
HDBaseT
HDBaseT
HDBaseT
DCP-SRX N
DISPLAY N
HDBaseT
Ring Mode
6.2 Installation & Connection
To create a Chain- or Ring-type connection of multiple DCP-MTXs, DCP-SRXs, sources
and displays, please refer to the instructions below and the “SYSTEM WIRING” chart:
1. Connect DCP-MTXs and DCP-SRXs through HDBT:
1) Connect HDBT OUT of the first DCP-MTX to HDBT IN of the next (e.g. DCP-
MTX 1 to DCP-MTX 2);
2) Connect the rest DCP-MTXs through HDBT likewise.
3) Connect HDBT OUT of the first DCP-SRX to HDBT IN of the next (e.g. DCP-
SRX 1 to DCP-SRX 2);
4) Connect the rest DCP-SRXs through HDBT likewise.
5) Connect HDBT OUT of the last DCP-MTX to HDBT IN of the first DCP-SRX
