Remote Workstation Graphics Card
Page 32
8.3
Choose a connection broker if required
All Amulet Hotkey zero clients can be configured to use a
third party connection broker (also known as a connection
management server). For example, the following connection
broker products include PCoIP support:
•
VMware View Connection Server;
•
Leostream Connection Broker.
8.3.1
Role of the connection broker
Connection brokers simplify the administration effort for
managing large complex PCoIP systems.
A connection broker interacts with systems such as Active
Directory to dynamically assign PCoIP hosts to zero clients based
on the identity of the user establishing a connection from the
zero client.
Connection brokers are also used to allocate a pool of hosts to a
group of zero clients.
8.3.2
Specify the connection broker
You can use any of the available management tools (see section
) to specify the connection broker:
•
you must provide the IP address or DNS name of the
connection broker;
• you must also specify the
Connection Management
Interface
connection type for the PCoIP session.
8.3.3
Using the connection broker
Instructions for using a connection broker to connect your zero
clients to hosts are available in the
Teradici.PCoIP®.Zero.Client.
and.Host.Administrator.Guide
(available to download from
techsupport.teradici.com
).
Note:
For further information about using connection brokers,
contact Amulet Hotkey Technical Support. See also the
Knowledge Base Article
Can.I.use.a.connection.broker.with.
PCoIP.technology?.(15134-24)
on the Teradici website.
