OPERATION INSTRUCTIONS
P
ROCESS
M
ANUAL
5.8 Clear
Alarms
Visible and audible Alarms signals are generated by the DPC and DTC. The visible alarms
will be presented both on the touchscreen and the TSC-2 computer(s), the audible alarms are
available on the touchscreen only.
Two different audible alarm signals are available:
•
operator alert: an intermittent
beep-beep-beep
to alert an operator for action (press ‘Start‘
for example)
•
alarm signal: a continuous
beeeeeeeeeeeeep
to alert for an alarm situation
5.8.1
Required action
•
Operator alert signals
(beep-beep-beep)
require the operator to press ‘Start‘ to have the
furnace proceed to the next step in the process.
•
Alarm situation signals
(beeeeeeeeeeep)
require the operator to alert the responsible
person(s) immediately.
5.8.2
Touchscreen
1) touch the touchscreen to silence
the buzzer
2) read the alarm message in the
bottom line of the screen
3) take the appropriate action as
described in section
Error!
Reference source not found.
.
5.8-2
