AMTECH Pallet Rack EN Installation Guide
AMTECH, spol. s r.o. |
www.amtech-robotics.cz
|
| +420 541 225 215
5
SAFETY
WARNING
•
The stand is dimensioned for a maximum pallet weight of 1000 kg
•
The stand must be anchored to the concrete floor C20 / 25 th. min. 160 mm
•
The stand is anchored using 12 pcs of expansion anchors HST M 12/20
•
The anchor must be at least 100 mm from the edge of the concrete
•
The load on the pallet must be evenly distributed
•
The pallet must be placed correctly on the stand
•
Improper installation or use of unsuitable anchoring devices may cause collapse of the stand
or its deformation. People can be crushed and the equipment and materials can be damaged.
After installation, a risk analysis is required.
When installing and handling the product, the safety precautions resulting from applicable legislation
(i.e. any international, European, national and local regulations, laws, ordinances or regulations that
are relevant and applicable to a particular product or area), installation instructions and safety
precautions according to the installation manual must be followed.
The person handling the product is always obliged to follow the installation instructions and taking into
account the condition of the product as well as weather, temperature and other external conditions
at the installation site.
The product must be installed professionally by a qualified person who is qualified to install it, and the
instructions in the installation manual and safety precautions must be observed.
Prior to installation, it is necessary to verify whether the installation site can withstand the weight of
the product, even with its maximum possible load.
Improper installation of the product and improper handling of the product may result in injury, death,
or serious injury or property damage.
When installing and handling the product, it is necessary to use adequate personal protective
equipment (protective gloves, safety helmet, etc.).
It is not permitted to make any changes to the design of the product during installation or use by the
end user without the written consent of the seller. Otherwise, the seller is not liable for any damage
caused by design changes or modifications.
The end user is obliged to ensure that the person handling the product is acquainted with the technical
specification of the product, the method of its use and the safety measures that must be strictly
observed.