AMT PANGAEA ULTIMA U2 Pre/Post FX firmware
When you use this firmware the U2 is divided into two parts — the
Pre
section and the
Post
section.
Both sections have their Inputs, Output, and Effects.
The Pre section:
The Post section:
Input — IN L
Output — OUT R
Effects:
Noise Gate
(global setting)
Compressor
Phaser
Resonance Filter
(wah-wah etc.)
Input — IN R
Output — OUT L
Effects:
IR cabsim
(1 IR for both L/R channels per preset)
Parametric Pre/Post EQ
Hi/Low pass f Presence
Delay or Reverb effect per preset
Pic. 1 — The common U2 Pre/Post chain with one preamp.
In this chain you can use any preamp, it could be a one-channel as well as a multi-channel preamp.
Meaning the AMT products, you can choose from:
One-channel preamps
: AMT
LA-1
series;
AMT
Bricks
series (these preamps have Bypass modes and they can be
chained in series);
Two-channels preamps
: AMT
LA-2
series;
Three-channels preamps:
AMT
SS
series.
PreIn
IN_R
OUT_L
OUT_R
PostOut
PostIn
IN_L
ULTIMA U2
Guitar
OUTPUT
Preamp
Pre/Post FX
PreOut
INPUT
OUTPUT