- 22 -
Z5
DT
User’s Guide
Appendix 1.2 technical specifications of media
1)
Specifications of continuous media (unit: inches)
Type
Illustration
Index
Continuous without adhesive
Print width: 0.71”
≤
a≤ 4.72”
Continuous with adhesive
Base media width:0.71”≤a≤4.72”
Print width: 0.71”≤b≤4.65”
Margin width: c ≤0.04”
Table appendix 1.2-1
2)
Discontinuous media specifications (unit: inches)
Type
Illustration
Index
Discontinuous label
with adhesive
Base paper width: 0.71”≤a≤4.72”
Paper margin width: b≤0.04”
Label width: 0.71”≤c≤4.65”
Label height:: d≥0.39”
Gap width: e≥0.08”
Discontinuous
punched
label/paper without
adhesive
Punched paper width: 0.71”≤a≤4.72”
Punched paper height: b≥0.39”
Detection hole position: c≤a/0.08”
Detection hole width: d≥0.20”
Detection hole height: e≥0.08”
Discontinuous
marked label/paper
without adhesive
Marked paper width: 0.71”≤a≤4.72”
Marked paper height: b≥0.39”
Mark position: c≤a/0.08”
Mark width: d≥0.39”
Mark height: e≥0.16”
Table appendix 1.2-2
Appendix 2 self-test page
Self-test page includes printer configuration information, printer internal fonts and print head test information.
The printer configuration information and printer internal fonts reflect the current internal configuration of the
printer, and the print head test information reflects the status of the print head.
