- 20 -
Z5
DT
User’s Guide
6 Appendix
Appendix 1 technical specification
Appendix 1.1 main technical specifications
Item
Fastmark Z5
DT
parameter
Printing
Resolution
203DPI
Print method
Thermal
Print width (Max.)
4.09” (104mm)
Print speed (Max.)
6 ips (152mm/s)
CPU
32bit RISC microprocessor
Memory
FLASH: 4MB
SDRAM: 64MB
Extended FLASH: it can be extended to 8MB.
Print head temperature
detection
Thermal resistor
Print head position
detection
Micro switch
Paper mark detection
Photoelectric sensor
Paper existence detection
Photoelectric sensor
Communication interface
USB interface or USB int optional interface;
Optional interface: serial interface, CENTRONICS parallel interface,
Ethernet interface and WLAN interface.
Media
Media type
Continuous paper, label, marked label/paper, etc.
Roll OD (Max.)
5.0” (127mm)
Roll width (Max.)
4.72”: (120mm)
Roll ID
0.5” (12.5mm) / 1.0” (25mm)
Media out mode
Tear off, peel-off, etc.
Character
Barcode
Graphics
Character
enlargement/rotation
Support four types of rotation printing (0°, 90°, 180°, 270°)
Bitmap fonts can be enlarged up to 10 times.
Vector fonts can be zoomed without scale.
Character set
7 bitmap fonts and 1 vector font are built-in.
User-defined bitmap and vector fonts can be downloaded into the
printer.
