- 2 -
Z5
DT
User’s Guide
1.3 Appearance and module
1 window
2 top cover
3 LCD (optional)
4 Logo plate
5 bottom cover
6 guard board for bottom cover
7 button
8 power switch
9 cover open lever
10 LED
11 tear-off bar
12 print head fixing plate
13 print head
14 latch
15 guard board for print head
16 transmissive sensor
17 upper path
18 paper roll holder baffle
19 paper roll holder
20 sensor cover board
21 platen roller shaft sleeve
22 platen roller
23 lower path
24 paper roll holder thumb wheel
25 entrance for external paper roll
26 9-pin serial interface baffle
27 serial interface
28 interface board
29 USB interface
30 24V power interface
31 micro switch
32 reflective sensor
1.4 Introduction of main modules
1)
Button and LED (7, 10): indicate the printer status and complete printing function;
2)
Power switch (8): press “O” to power off and press “
－
” to power on;
3)
Transmissive sensor (16): used for calibration, detection and location of media;
4)
Paper roll holder baffle (18), paper roll holder (19): support paper roll holder and stop paper roll holder
from shaking;
5)
Print head micro switch (31): used to detect whether the print head is uplifted or pressed down;
6)
Reflective sensor (32): used for the calibration, detection and location of media with black marks.
