About
these operating instructions 5
ALF19 Series
1 About these operating instructions
1.1 General information about these operating instructions
These operating instructions contain important information about the Automatic Label
Feeder of the ALF19 series (hereinafter referred to as the label feeder) and its
handling.
They are aimed at the operator and people who work on and with the label feeder.
These operating instructions are part of the label feeder and must be
kept in the immediate vicinity of the device.
They must always be accessible to personnel.
Read these operating instructions carefully.
This is the only way to ensure safe use and a long service life of the label feeder.
Before you start work, read the
Safety chapter first!
10
The
Glossary
8
explains the technical terms used in these operating instructions.
The
List of abbreviations
7 lists the abbreviations used in these operating
instructions.
If you have any questions after reading the operating instructions, please contact us:
AMS Software & Elektronik GmbH
Lise-Meitner-Strasse 9
D-24941 Flensburg
Tel.: +49 461 90 39 80
Fax: +49 461 90 39 8 0
We always welcome suggestions and comments on these operating instructions.
Please send your feedback to the following email address:
Summary of Contents for ALF19 Series
