32
Preparing
the label feeder for operation
ALF19 Series
The label feeder is supplied with power via three alternative options:
The power supply line connects the label feeder directly to the internal power
supply of the pick-and-place machine via the machine adapter.
This allows the device to be connected directly to the pick-and-place machine.
A plug-in power supply unit with the associated adapter can optionally be used as
an external power source.
The power supply units have connector plugs for EN, UK and US connections.
There are machine adapters that only need to be connected with the help of a host
feeder or relevant components from the pick-and-place machine.
4.4 Mounting the label feeder on the machine adapter
Summary of Contents for ALF19 Series
