CURRENCY DISCRIMINATION COUNTER MiB-9 SERVICE MANUAL
- 8 -
1-4. Setting Up Your Machine
1-4-1. Power Cord
Plug one end of the cord into the rear of the machine and the other
end into a standard AC power outlet with surge protector embedded
with.
When turning on the power switch, the machine will display version
and checksum. If there is Service Call number saved by a service
provider, the Call number will be displayed.
1-4-2. Printer
Your MIB-9 has a serial interface port, which allows you to connect to an external printer as recommended by
AMROTEC® to print out counting result. To connect the printer to the machine, follow the steps below:
1. Make sure that both the MIB-9 and the printer are turned off.
2. Plug the cable of printer into the Serial port of MIB-9 .
3. Turn on the Printer and MIB-9 .
CAUTION
In case that another port is used to avoid electrical shock, turn off MIB-9 and turn on
the machine after Port is connected.
