BT-AFT1 Arc Fault Breaker Tester
Users Manual
99 Washington Street Melrose, MA 02176 Phone 781-665-1400Toll Free 1-800-517-8431
Visit us at www.T
estEquipmentDepot.com
Page 1: ...BT AFT1 Arc Fault Breaker Tester Users Manual 99 Washington Street Melrose MA 02176 Phone 781 665 1400 Toll Free 1 800 517 8431 Visit us at www TestEquipmentDepot com ...
Page 2: ...f the factory the instrument has not been tampered with or taken apart Should your instrument fail due to defective materials and or workmanship during this two year period a no charge repair or replacement will be made to the original purchas er Please have your dated bill of sale which must identify the instrument model number and serial number and call the number listed below Repair Department ...
Page 3: ...m an internal test which takes approximately two seconds 2 After approximately two seconds press and hold the Trip button The Arc LED will flash during arc simulation followed by the AC Voltage LED turning off once the AFCI breaker has tripped If the AFCI breaker does not trip the AC Voltage LED will remain illuminated The unit is either plugged into a non AFCI circuit the AFCI breaker is defectiv...
Page 4: ...uit consult an electrician If the AFCI does trip reset the AFCI Then insert the AFCI tester into the receptacle to be tested Activate the test button on the AFCI tester for a minimum of 6 seconds when testing the AFCI condition A visible indication on the AFCI tester must cease when tripped If the tester fails to trip the AFCI it suggests a a wiring problem with a totally operable AFCI or b proper...
