9
Installation Guides
Installation Requirements
1) With Stable and independent power supply.
2) The repeater should be installed in the space without corrosive gas, smokes and leaky liquids.
3) The repeater should be installed on the wall that is ventilated, waterproof, lightning-proof and
without sunshine.
4) The height of the installation site should be safe and easy for cabling, maintaining, dissipating
heat.
Installation tools
No.
Items
Q’ty
Remarks
1
Impact drill
1
Drill holes on wall, self-provided
2
Wrench
1
Reinforce the interface connection, self-provided
3
U-shape holder, expansion
pipe and screws
4
Fix the device, included in the package
4
Mobile phone for testing
1
Test installation effectiveness, self-provided
5
Multimeter
1
Test voltage and wiring connection, self-provided
6
Screwdriver
1
Tighten or fasten the device, self-provided
7
Waterproof tape
A few Prevent liquid from leaking into the feeder
interface, self-provided
Installation Steps
This repeater should be installed on a hard, firm and flat surface, its installation steps are as
follows:
1) Select a proper installation site according to the size and installation requirements of the
repeater.
2) Estimate and mark the sites of U-shaped back holder installation holes. Drill holes with the
impact drill. Sizes of the holes are 7mm. The expected sites are as follow: (unit: mm)
