Temposonics
®
R-Series
V
POWERLINK
Operation Manual
I 36 I
4.13 Frequently ordered accessories for RDV design
– Additional options see
Position magnets
Ø 32.8
(Ø 1.29)
Ø 23.8
(Ø 0.94)
Ø 13.5
(Ø 0.53)
Ø 4.3
(Ø 0.17)
60°
140°
3 (0.12)
7.9
(0.31)
Ø 32.8
(Ø 1.29)
Ø 23.8
(Ø 0.94)
Ø 13.5
(Ø 0.53)
Ø 4.3
(Ø 0.17)
7.9
(0.31)
Ø 25.4
(Ø 1)
Ø 13.5
(Ø 0.53)
7.9
(0.31)
Ø 13.5
(Ø 0.53)
Ø 17.4
(Ø 0.69)
7.9
(0.31)
U-magnet OD33
Part no. 251 416-2
Ring magnet OD33
Part no. 201 542-2
Ring magnet OD25.4
Part no. 400 533
Ring magnet OD17.4
Part no. 401 032
Material: PA ferrite GF20
Weight: Approx. 11 g
Surface pressure: Max. 40 N/mm
2
Fastening torque for M4 screws: 1 Nm
Operating temperature:
−40…+105 °C (−40…+221 °F)
Material: PA ferrite GF20
Weight: Approx. 14 g
Surface pressure: Max. 40 N/mm
2
Fastening torque for M4 screws: 1 Nm
Operating temperature:
−40…+105 °C (−40…+221 °F)
Material: PA ferrite
Weight: Approx. 10 g
Surface pressure: Max. 40 N/mm
2
Operating temperature:
−40…+105 °C (−40…+221 °F)
Material: PA neobond
Weight: Approx. 5 g
Surface pressure: Max. 20 N/mm
2
Operating temperature:
−40…+105 °C (−40…+221 °F)
Marked version for sensors with inter-
nal linearization: Part no. 254 226
Marked version for sensors with inter-
nal linearization: Part no. 253 620
Marked version for sensors with inter-
nal linearization: Part no. 253 621
Magnet spacer
O-rings
Ø 14.3
(Ø 0.56)
Ø 23.8
(Ø 0.94)
Ø 31.8
(Ø 1.25)
Ø 4.3
(Ø 0.17)
3.2
(0.13)
Ø 15.3
(Ø 0.6)
Ø 2.2
(Ø 0.09)
Ø 16.4
(Ø 0.65)
Ø 2.2
(Ø 0.09)
Ø 21.9
(Ø 0.86)
Ø 2.6
(Ø 0.1)
Magnet spacer
Part no. 400 633
O-ring for threaded fl ange
M18×1.5-6g
Part no. 401 133
O-ring for threaded fl ange
¾"-16 UNF-3A
Part no. 560 315
O-ring for pressure fi t fl ange Ø 26.9 mm
Part no. 560 705
Material: Aluminum
Weight: Approx. 5 g
Surface pressure: Max. 20 N/mm
2
Fastening torque for M4 screws: 1 Nm
Material: Fluoroelastomer
Durometer: 75 ± 5 Shore A
Operating temperature:
−40…+204 °C (−40…+400 °F)
Material: Fluoroelastomer
Durometer: 75 ± 5 Shore A
Operating temperature:
−40…+204 °C (−40…+400 °F)
Material: Nitrile rubber
Operating temperature:
−53…+107 °C (−65…+225 °F)
O-rings
Mounting accessories
Ø 26.9
(Ø 1.06)
1.4
(0.05)
2.2
(0.09)
Ø 20
(Ø 0.79)
Ø 2.65
(Ø 0.1)
M18×1.5-6g
A/F 27
8.7
(0.34)
¾"-16 UNF-3A
A/F 28
11
(0.43)
Back-up ring for pressure fi t fl ange
Ø 26.9 mm
Part no. 560 629
O-ring for mounting block with bottom
entry
Part no. 561 435
Hex jam nut M18×1.5-6g
Part no. 500 018
Hex jam nut ¾"-16 UNF-3A
Part no. 500 015
Material: Polymyte
Durometer: 90 Shore A
Material: FKM
Durometer: 80± 5 Shore A
Operating temperature:
−15…+200 °C (5…+392 °F)
Material: Steel, zinc plated
Material: Steel, zinc plated
Controlling design dimensions are in millimeters and measurements in ( ) are in inches