Ampgard·
INSTALLATION INSTRUCTIONS
25L4 and 50L4 STARTERS
Page 1
6379027 HOi
Follow these instructions for easy installation of Ampgard Starters
822647
1
Remove the shipping clamps by
taking out two bolts and clamps.
822645
4
Obtain a piece of
3f4
inch pipe
about three feet long to use as a
"jiffy" bar. Insert in contactor clamp
as shown.
822652
2
Remove four contactor phase
barriers and three main fuses.
822655
5
With left foot (or hand) LIFT latch
on bottom left hand corner of
contactor, and at the same time give
contactor a sharp pull toward you with
the jiffy bar.
822651
3
Remove the control plug from the
contactor.
822654
6
Part way out the contactor will
relatch in a "detent" position
which will later be useful for
maintenance. To remove the contac
tor, press the latch bar DOWN with
your left foot or hand, and at the same
time pull the contactor forward with
the jiffy bar. Be prepared to apply a
lifting force to the jiffy bar as the
contactor rolls outward.
www
. ElectricalPartManuals
. com
