Amped Wireless TAP-R2 Page 138 User Manual Download

Page: 138 / 149

TAP-R2

USER’S GUIDE

137

Industry Canada Statement:

This Class B digital apparatus complies with RSS-210 and ICES-003 of the Industry

Canada Rules. Operation of this device is subject to the following two (2) conditions:

(1)

This device may not cause harmful interference

(2)

This device must accept any interference received, including interference that may cause undesired
operation.

Radiation Exposure Statement:

This

equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.

The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Caution:

The device for the band 5725-5850 is only for indoor usage to reduce potential for harmful

interference to co-channel mobile satellite systems.

Summary of Contents for TAP-R2






















































































































































Search results

Summary of Contents for TAP-R2

Reviews:

Related manuals for TAP-R2

Brands by name

Popular brands

Amped Wireless TAP-R2, User Manual

Search results

Summary of Contents for TAP-R2

Reviews:

Related manuals for TAP-R2

Brands by name

Popular brands