TAP-EX3
USER’S GUIDE
12
12
Select a 5GHz Home Network to Extend (5GHz)
Select the 5GHz Wi-Fi network that you wish to extend. Check
that your Wi-Fi Network has a signal strength of 70% or
greater.
If you have already selected a 2.4GHz network and do not wish
to select a 5GHz network, tap Skip to continue. Otherwise, tap
Next
to continue.
If you fail to find any Wi-Fi networks, or your signal strength is
below 70%, the Range Extender may be placed too far from the Wi-Fi network that you are trying to extend.
Move your Range Extender closer to the Wi-Fi network that you are trying to extend and tap
Rescan
to scan
again.
The Scan results page will display information regarding the name of the network (SSID), the channel which the
Wi-Fi network is operating on and the security type of the network. The results page will also display what the
signal strength is of every network detected.