ELD V2 EARTH LEAKAGE RELAY
Issue: R8, Date: 10/08/2011, CRN: 8530
ELDB006 Rev8 ELD V2 (2002) Earth Leakage Protection Relay User Manual
Page 4
1
Receiving and Storage
1.1
Receiving
All possible precautions are taken to protect the equipment against damage or losses during shipment, however
before accepting delivery, check all items against the packing list or Bill of Landing. If there are shortages or
evidence of physical damage, notify Ampcontrol immediately.
Notify Ampcontrol within 7 days (maximum) in case of shortages or discrepancies, according to the packing list. This
action will help ensure a speedy resolution to any perceived problems. Keep a record of all claims and
correspondence. Photographs are recommended.
Where practicable do not remove protective covers prior to installation unless there are indications of damage.
Boxes opened for inspection and inventory should be carefully repacked to ensure protection of the contents or else
the parts should be packaged and stored in a safe place. Examine all packing boxes, wrappings and covers for
items attached to them, especially if the wrappings are to be discarded.
1.2
Storage after Delivery
Where equipment is not to be installed immediately, proper storage is important to ensure protection of equipment
and validity of warranty.
All equipment should be stored indoors protected from the elements in a cool dry area. If storing on the ground,
ensure that the storage area is not an area where water will collect.
1.3
Unpacking of Equipment
The method of packing used will depend on the size and quantity of the equipment. The following cautions should be
interpreted as appropriate.
CAUTION!
Take care when unpacking crates as the contents may have shifted during transport.
Make sure that cable drums are securely attached to their shipping pallets before
attempting to move them (if applicable).
The disposal of packaging materials, replaced parts, or components must comply with
environmental restrictions without polluting the soil, air or water.
Ensure that any timber and cardboard used as packaging is disposed of in a safe and
environmentally responsible manner.
Where possible, dispose of all waste products i.e. oils, metals, plastic and rubber products
by using an approved recycling service centre.
