CPS-A USER MANUAL
ISPB028 R1
Page 7
4
Installation
Install the CPS-A power supply on a TS 32 type DIN rail in a cool, dry, dust and vibration free area.
CAUTION!
The unit should be installed with the ventilation slots on the top and lower faces to ensure
proper ventilation.
Take care not to allow swarf and other metallic items to penetrate the enclosure during
installation of adjacent equipment.
Ensure adequate space above and below the unit to allow free air movement through the
slots.
WARNING!
The input mains terminals and output DC terminals have minimum separation distance of
50mm. This separation must be maintained by using insulated wires & lugs.
Wiring to the CPS-A must comply with local wiring codes and Intrinsically Safe standards
as applicable to the application.
Illustration showing Facia Panel and Cable Connections
