Professional,
Creditable,
Successful
DMT10768T097-31WT User Guide
8
(PIC 3)
Step 4
: Click
Connect Ethernet.
After accomplishing, we can view the
Received
,
RX speed
,
Transmitted
and
TX
speed
in the Data meter;
Step 5
: The memory will be saved in the system automatically. If reconnect the same Ethernet next time, there is no need
to set the IP address again, just plug the Internet cable, it will be connected automatically.
3.7 3G Mobile Manager
The underlying drivers and tool software of 3G network has been installed in the system.
Step 1
: Plug the 3G card in the USB 1 interface or the USB 0 interface if the status of USB 0 is in the HOST status, the
status bar will show the ICON “
3G
”. If the “3G” can’t be recognized, please confirm if the pilot lamp flashes or not.
If the warning lamp flashes but the status bar does not show the ICON “
3G
”, please check in the Modem list and confirm
if this 3G card belong to the types that this system support;
Step 2
: Click
3G Mobile Manager
in the host pane;
Step 3
: Under the
Network Status >Disclaimer
, current network operators can be found, such as “China Telecom
network”. Select
Connect to network
;
Step 4
: In the Modem list, all types of 3G card that current systems support can be checked, which is as shown in the list
below:
NAME
TYPE
HUAWEI-E1750
WCDMA USB dongle
