2/2
IM75326 rev 07.22.19
Rotate bracket into position. Insert portion of
bracket that attaches to J clip first. Then rotate
over front stud and Hitch bolt. Re-use nut from
step 2 and hand tighten only.
Using a 15mm socket attach bolt to J Clip. Snug
all three mounting positions. Torque Bolt to 20ft-
lbs. Next torque bolts from step 4. Hitch bolt
80ft-lbs and nut to 35ft-lbs.
13,15 & 21mm
Set J Clip nut into position in bed sheetmetal
to use as a bracket attachment point.
Offset the step pad as shown and secure using
provided PT screws. Tighten to 5 ft-lbs using a
T25 torx bit.
T25 Torx
3
5
4
6
7
8
www.4x4ok.com
