AMP
®
MarinerPro LED Underwater Light
(set of 3) AUL-8000-34-B-BZ
INSTALLATION & MAINTENANCE GUIDE
w w w. a m p l i g h t i n g . c o m
–2–
Important Safety Instructions: Read Before Installation
!
Important Safety Instructions
!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-
age lamp.
6. Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
This fixture is intended for installation in accordance with local codes and the
National Electric Code (NEC). Failure to adhere to these codes and instruc-
tions may result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, opera-
tion maintenance or mounting situation.
1. Use only in ponds and small decorative fountains where persons
will immerse no more than their hands and lower arms while the
product is energized.
2. DO NOT use in water intended for swimming, wading, immersion,
or bathing.
3. All installer completed cable connections must be located outside
of pond or fountain.
4. Low voltage circuit must be supplied by a power unit marked as
suitable for supplying submersible luminaires.
5. Power unit must be supplied by a circuit protected by a ground
fault circuit interrupter (GFCI).
6. “Maximum depth: 18 in (450 mm)”.
