INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
Install Fixture Body
2
Remove Face Cover
1
[email protected] • 813.978.3900
–5–
Install Face Cover
3
AMP
®
DecoPro LED Deck Light
ADL-2012-4-B-BZ
Wire Connections
4
Rotate the face cover until it
stops and then lift the cover
straight off.
Note: The first time it may be
difficult because the fixture
has a very tight o-ring seal and
a grease sealant for moisture
protection.
Face Cover
Fixture Body
Rotate
Fixture Body
Lock Screw
Wall Anchor
(optional)
Attach the fixture body to your
desired location and secure with lock
screws.
Note: Wall anchors may be required
for certain installation conditions
(e.g. Brick walls, Concrete Walls,
etc.). Mark on the wall using holes
on the fixture body to drill holes for
your wall anchors. Remove base and
drill proper holes in the wall, then
insert wall anchors.
Hole
Push face cover back onto the
fixture body aligned with the gaps
in the fixture body. Once the face
cover is flush with the fixture body,
rotate the face cover until it stops
and locks into place.
Fixture
Body
Face
Cover
Strip both leads from luminaire
pigtail. Using two wire connectors
(sold separately), connect leads
from luminaire to main supply cable
leads.
Fixture
Wire
Connector
Main Supply Cable
Pigtail
