AMobile GT78-VN, User Manual

Page: 45 / 52

- 31 -
Using the Device
3.5 Enabling Bluetooth and Pairing with Bluetooth
Device
1. Swipe down the Status bar and tap the BLUETOOTH tile to enable Bluetooth
if it isn't enabledyet.
2. In the Quick Settings panel, tap and hold the BLUETOOTH tile to access the
Bluetooth settings page.
3. If the Bluetooth device you want to pair with is not displayed in the AVAILABLE
DEVICES list, tap SEARCH FOR DEVICES in the upper right corner.
The GT78-VN proceeds to scan for any Bluetooth device in range. Then it
displays the names of the device(s) found.
If the GT78-VN stops scanning before the other device becomes discoverable,
tap SEARCH FOR DEVICES again.
Note : If the device to pair with isn’t displayed after the scan, check if it is
configured to be discoverable.
4. Tap the device you want to pair with. When the Bluetooth pairing request
dialog box appears, tap Pair . The GT78-VN will then send a connection
request to the device you want to pair with.
On the device to pair with, a dialog box appears requesting to enter or verify the
pairing code. The passkey entered or shown on the GT78-VN and the Bluetooth
device must be the same.