Ammann ARR 1575 Yanmar, Operating Manual

Page: 79 / 146

73 ARR 1575
555149
555135
555142
555143
OPERATION MANUAL
Reattach the wiring holder using two screws.
Reconnect the cable to the (-) terminal of the machine‘s battery.
Risk of burns from splashing oil!
Eye injuries, burns: Wear safety goggles.
Rotating the engine using the starter
Rotate the engine using the starter, about 1–2 minutes.
After several revolutions, any oil accumulated in the combusti-
on chambers should begin to flow out of the glow plug holes.
Repeat the procedure after about 5 minutes. There must not be
any oil left in the combustion chambers.
Reattach the glow plugs (18Nm torque).
Reconnect the connecting cables and cables to the glow plugs
(1.5 Nm torque).
Mount the engine valve cover.
Mount the wiring holder.
Rotate the engine twice using the centre screw on the
crankshaft, use a ratchet spanner (1). If the engine cannot be
rotated, recheck the assembly procedure, otherwise contact an
authorized dealer.