Ammann ARR 1575 Yanmar, Operating Manual

Page: 56 / 146

50 ARR 1575
557021
2.6. Actuators and dashboard instruments
2.6.2.3. Handling
The infrared remote control is located under the control panel
cover.
It includes the following transmission features:
- The solar cells
- The infrared diodes for data transmission and measuring the
safety distance.
Before startup, clean the transmission elements.
Keep the solar cells clean during operation.
Accident hazard due to covered over lower part of the
housing!
Before and during the operation with the infrared re-
mote control, make sure the entire bottom part of the
cover remains completely open throughout the whole
operation.
In particular, the operator’s hand must not cover the lo-
wer part of the housing even partially.
Proper carrying and use of the infrared remote control
Pay attention to correct positioning.
• Proper function requires direct visual contact between the
manual infrared remote control and the infrared sensor on
the machine.
The infrared sensor must always be in the area of effect
of the infrared remote control.
The operating angle of the infrared remote control is 40°.