8.5
Ex citer: Oil level / Oil change
w
Check / change ex citer oil when its warm.
w
APR 3520: The vent ing screw (3) must al ways first
be un
screwed when check
ing the oil level or
chang ing the oil.
w
When the dip stick is screwed in, the op ti mal oil
level is be tween the «MIN» and «MAX» lines.
•
Un screw vent ing screw (
3
), oil fill ing plug/dip stick (
1
) and oil
drain plug (
2
).
•
Drain-off old oil.
•
Screw-in oil drain screw (
2
).
•
Fill-in new oil through the oil fill hole (
1
). See lu bri ca tion plan
for quan tity and qual ity.
•
Re place oil fill ing plug/dip stick (
1
) and vent ing screw (
3
).
•
Un screw oil fill ing plug/dip stick (
1
), check the oil level again
and top up with oil if nec es sary.
A
1
2
0
2
0
0
0
0-
2
H
b
m
G
g
n
ut
h
ci
dr
e
V
n
n
a
m
m
A
8
1
0
2/
8
0
8. Main te nance ma chine
93
En vi ron men tal haz ard through op er at ing ma te ri -
als!
w
Col lect dis charg ing oil and dis pose of in an en vi ron -
men tally friendly man ner.
w
Do no al low it to en ter the ground wa ter, wa ter bod -
ies, or sew age sys tem.
Burn ing haz ard.
Work ing on the ex citer may cause a burn ing haz ard
from hot oil.
w
Wear safety equip ment (gloves).
w
Slowly, care fully open the oil drain age screw to re -
lease pres sure.
