Ammann 12799752, Translation Of The Original Operating Instructions

Page: 59 / 96

8.0.1 Ge ne ral in for ma ti on
•
Ob serve the safety reg u la tions.
•
Only qual i fied, authorised per sons may carry out re pairs.
•
In the event of faults, re fer to the op er at ing and main te -
nance in struc tions for cor rect op er a tion and main te -
nance.
•
If the fault can not be lo cated, re fer re pairs to an Ammann
ser vice cen tre.
•
Al ways first check items that are eas ily ac ces si ble (fuses,
LED’s, etc.).
•
Avoid con tact with ro tat ing parts.
7
1
0
8
9
8
6
0-
2
H
b
m
G
g
n
u t
h
ci
dr
e
V
n
n
a
m
m
A
7
1
0
2/
0
1
8.0.2 Trou ble shoot ing ta ble
Fault Pos si ble cause Re me dial ac tion
En gine does not start Fuel tank empty
No ig ni tion spark
Ig ni tion switch at « OFF »
Ig ni tion switch faulty
Re fuel
Change spark plug
Have dam age re paired
Set ig ni tion switch to « ON »
Change ig ni tion switch
En gine does not start when
starter is op er ated
Starter faulty
Spring bro ken
Re place starter
Re place starter
Starter ca ble of re vers ing
starter does not re turn to ini -
tial po si tion
Foul ing
Spring bro ken
Clean starter
Re place starter
En gine does not reach top
speed
Throt tle ca ble faulty
In cor rect gas ca ble ad just ment
Air fil ter clogged
En gine faulty
Car bu ret tor faulty
Re place
Ad just throt tle ca ble
Clean fil ter car tridge or re place
Re place en gine/have dam age re paired
Re place car bu ret tor
En gine runs at high speed,
but no vi bra tion
Cen trif u gal clutch faulty
Con nect ing rod bro ken
Re place cen trif u gal clutch
Have re newed by Ammann af ter-sales ser vice
Tam per move ment ir reg u lar,
jumps In cor rect speed
Springs bro ken
Throt tle le ver not at « max »
Cor rect speed
Re new by Ammann Cus tomer Ser vice
Set throt tle le ver to « max »
8. Trou ble shoot ing
53