User’s Guide
ACC-7735
4-Position
Charging Cradle
© 2020 AML
2190 Regal Parkway • Euless, TX 76040
800.648.4452 • Local: 817.571.9015
www.amltd.com • 800.648.4452
© 2020 AML
© 2020 AML
2190 Regal Parkway • Euless, TX 76040
800.648.4452 • Local: 817.571.9015
Regulatory Information
All AML devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as required.
Any changes or modifications to AML equipment, not expressly
approved by AML, could void the user's authority to operate the
equipment.
Power Supply
Use only an AML approved Power Supply, output rated 24 VDC and
minimum 2.5A. The PWR Power Supply is certified to EN60950.
Disclaimer
AML reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the
reader should in all cases consult American Microsystems, Ltd. to
determine whether any such changes have been made. The information
in this publication does not represent a commitment on the part of AML
AML shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting
from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated into another language without
the prior written consent of AML
FCC Declaration of Conformity
Product Name: 4-Position Charging Cradle
Model Number: ACC-7735
Radio Frequency Interference Requirements
This equipment complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This equipment may not cause harmful
interference, and (2) this equipment must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a residential environment. This
equipment generates uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If you determine the equipment does cause harmful interference to
radio or television reception (this may be determined by monitoring the
interference while turning the equipment off and on), you are encour-
aged to try to correct the interference by one of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
· Consult the dealer or an experienced radio or TV technician for help.
Radio Frequency Interference Requirements - Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
Marking and European Economic Area (EEA)
Products intended for sale within the European Union are
marked with the CE mark which indicates compliance to
applicable Directives and European Normes (EN), as follows.
Amendments to these Directives or EN’s are included.
· Electromagnetic Compatibility Directive 89/336/EEC
· Low Voltage Directive 73/23/EEC
Charge up to four AML Scepter or Striker
mobile computers at one time, with one
device using the ACC-7735.
