1
4
6
3
2
Power/Activity LED:
Blue = on.
Blue flashing = infra-red (IR) command received.
Red = standby.
Warning!
Before connecting or disconnecting the
Aria 7X to your TV using any kind of cable, first switch
off Aria 7X, the TV and all other devices connected to it
(amplifiers etc.) and disconnect them from the mains
electrical supply.
You have a choice of ways to connect the audio and
video produced by the Aria 7X to your TV:
1. HDMI:
Recommended for best quality. Connect an
HDMI cable from the HDMI output of the Aria 7X to
the HDMI input of your TV.
2. Analog A/V:
Provides good quality in SD only.
Composite video with analogue audio left/right.
Connect the 3.5 mm jack to the analogue A/V output
on the Aria 7X. Connect the yellow RCA plug to the
yellow video port on your TV. Connect the red and
white RCA plugs to the red and white audio ports on
your TV.
Connecting your television directly to the audio/video
output of your Set Top Box will assure a more vivid
picture and enhance your viewing enjoyment.
Connecting via Wi-Fi
The Aria 7X may be supplied with internal 2.4 GHz Wi-Fi.
If your Aria 7X has Wi-Fi, please contact your service
provider for detailed instructions on wireless network
configuration.
1. Analogue A/V output.
2. HDMI output.
3. Ethernet port.
4. Reset button. Only for use under guidance from
your service provider.
5. USB port.
6. DC power input 12 V 1 A.
Contents
Your Aria 7X is supplied with the correct power adapter
for your region. Depending on the choices made by
your service provider, your box may also contain the
optional accessories shown below.
The Aria 7X is protected with a clear plastic film. This
should be removed before use.
Optional accessories
Overview of the Aria 7X
1. Connecting the Aria 7X to a TV
Aria 7X User Guide
Connect an HDMI cable to the HDMI output of the Aria
7X and to the HDMI input of your A/V amplifier or home
cinema system.
3. Connecting the Aria 7X to the power
supply
Warning! The Aria 7X must only be used with the power
adapter provided with the product. Ensure the power
adapter supplied is the correct one for your region. If
you are unsure, contact your service provider.
Connect the power adapter to the DC power input of
the Aria 7X, then insert the power adapter plug into the
mains supply.
2. Connecting the Aria 7X to an A/V receiver
5
Remote control and batteries
HDMI cable
Ethernet cable
3.5 mm jack to
3 x RCA cable
