AMIMON CONNEX ProSight Installation And Operation Manual Download Page 65

Page: 65 / 90

Home Page

Safety

Introduction to CONNEX

ProSight

Opening the Package

Installing the Units

Operating the Units

Configuration Using

Operating the Units|Upgrading Firmware

Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017

Navigation pane

Upgrading Firmware

When a newer firmware version is available, the

UPGRADE

button (1)

appears.

To upgrade the firmware of the connected ProSight device, click the

UPGRADE

button (1). The firmware upgrade process is performed

automatically to the latest firmware version.

Editing Device Name

Click the

EDIT

button (1) to edit the device name.

Tip:

Before performing firmware upgrade, connect to the Internet.

CONNEX ProSight Installation and Operation Guide

Summary of Contents for CONNEX ProSight



























































































Search results

Summary of Contents for CONNEX ProSight

Reviews:

Related manuals for CONNEX ProSight

Brands by name

Popular brands

AMIMON CONNEX ProSight, Installation And Operation Manual

Search results

Summary of Contents for CONNEX ProSight

Reviews:

Related manuals for CONNEX ProSight

Brands by name

Popular brands