Amico AH7500E, Owner'S Manual

Page: 17 / 50

16
In either case, the total power requirements (VA) of all appliances
connected must be considered. Appliance and power tool manufacturers
usually list rating information near the model number or serial number.
AC APPLICATIONS
Before connecting an appliance or power cord to the generator:
Make sure that it is in good working order. Faulty appliances or power
cords can create a potential for electrical shock.
If an appliance begins to operate abnormally, becomes sluggish or stops
suddenly, turn it off immediately. Disconnect the appliance, and
determine whether the problem is the appliance, or if the rated load
capacity of the generator has been exceeded.
Make sure that the electrical rating of the tool or appliance does not
exceed that of the generator. Never exceed the maximum power rating
of the generator. Power levels between rated and maximum may be
used for no more than a few minutes.
Substantial overloading will open the circuit breaker.
Exceeding the time limit for maximum power operation or slightly
overloading the generator may not switch the circuit breaker OFF, but
will shorten the service life of the generator.
NOTICE
Limit operation requiring maximum power to a few minutes.
Maximum power is referring to the following table.
For continuous operation, do not exceed the rated power.
Rated power is referring to the following table.
MODELS
Rated Frequency(Hz)
Maximum Power(kVA)
Rated Power(kVA)
60
7.5
7.0
AH7500E