TUMBLE DRYER QUICK START GUIDE WTP 488 030
IO-WMS-1830 (EN)
05.2020./1
1. Top
2. Control Panel
3. Door
4. Base
5. Base access opening
6. Ventilation grates
7. Adjustable feet
8. Bottom cover
9. Name Plate
10. Lint filter
11. Drawer cover
8. Delay Start button
9. Drying level
10. Delicates
11. Anti-Crease
12. Start/Pause button
10+11. Child Lock
4
8
9
10
11
12
10 + 11
Dear Customer,
This Quick Start Guide is enclosed with detailed dryer
operating instructions. Before using the appliance carefully
read the Operating Instructions, especially guidelines for safe
use.
Level the appliance before connecting it to a wall socket. Do
not start the dryer before it is properly set up.
Only dry delicate fabrics, synthetics, wool using designated
programs. Only load such fabrics according a table of the
maximum load sizes (see page 2).
The correct tumble dryer operation extends its lifetime
so make sure the drum seal is dry (leave the door ajar after
drying). Do not clean your tumble dryer with harsh or abrasive
detergents.
Before drying
1
Spin the laundry in the washing machine before tumble
drying. The high spin speed can reduce the drying time and
save energy.
To make sure the drying results are uniform, sort the
laundry by fabric type and drying programme. Before the
drying close the locks, hooks and buttons, fasten the belts,
etc.
Do not over-dry clothes, as they can easily crease. Do not
dry rubber and elastic materials.
To prevent skin scalding caused by steam or hot appliance
components, only open the door after the drying
programme has been completed. To avoid extended drying
cycles and increased energy consumption, clean the
appliance filters after each use.
Do not dry clothes after dry cleaning.
Select the correct programme to refresh woollen clothing
to make the fabric fresh and fluffy.
Programme selector knob
2
Use the programme selector knob to select the
desired drying programme
Selectable functions: [Delayed start], [Drying level],
[Delicates], [Anti-Crease].
Touch
Start a programme
3
The Start / Pause indicator will flash when you
select a programme. To start the programme,
press the Start / Pause button. The Start / Pause
indicator indicates that the programme has
started and the drying indicator lights up.
If you open the door while the programme is
running, the appliance switches to standby. To
resume the programme, close the door and press
the Start / Pause button.
Do not open the door while the programme is
running. If you need to open the door, do not keep
it open for a long time.
End programme
4
At the end of the programme, the Start / Pause, water
container full, clean the lint filter and clean the heat
exchanger indicators will light up.
You will also hear a beep when the programme ends.
You can remove the laundry and prepare the appliance
for a new cycle.
1
2
3
4
5
6
7
8
9
10
11
