amiad Spin Klin Nova Angle, Installation, Operation & Maintenance Instructions Manual

Page: 18 / 103

18 Installation & Operation Manual Spin Klin™ Nova 910101-001009 | 01.2021
1. Introduction
Thank you for purchasing the user-friendly, simply operated Nova Spin Klin
TM
filter.
For operation and maintenance, please follow the instructions in this manual.
The Nova Spin Klin
TM
series consists of automatic self-cleaning filters, designed for filtering
water only, and must be operated within the pressure framework specifications.
2. General Safety Instructions
Note:
Applicable local or national safety rules and regulations for preventing accidents must be
applied in all work procedures in addition to the following instructions.
2.1. General Safety Instructions
•
Amiad Water Systems (manufacturer) filtration products are operated as a
core component in water systems. System designers, installers and operators
must comply with all relevant safety standards.
•
Prior to installation, operation, maintenance and/or any other type of action
carried out on the filter, carefully read the safety, installation and operation
instructions.
•
During installation, operation and/or maintenance of the filter all
conventional safety instructions must be observed in order to avoid danger
to the workers, the public and/or to property in the vicinity.
•
No change or modification to the equipment is permitted without advanced
written notification given by the manufacturer or by its representative(s) on
the manufacturer’s behalf.
•
Always observe standard safety instructions and good engineering practices
whilst working in the filter’s vicinity.
•
Use the filter only for its intended purpose as designed by Amiad Water
Systems. Any misuse of the filter may lead to damage and may affect your
warranty coverage. Consult with Amiad Water Systems prior to any non-
regular use of this equipment.
•
Observe the safety stickers on the filter and do not perform any operation
other than those given in this manual.
2.2. Shipment and Transporting
•
Shipping and transporting the filter must be done in a safe and stable manner
and in accordance with relevant standards and regulations.
•
For shipping, lifting and positioning the filter, use only approved lifting
equipment and authorized employees and contractors.