amiad Spin Klin Nova Angle, Installation, Operation & Maintenance Instructions Manual

Page: 17 / 103

Installation & Operation Manual Spin Klin™ Nova 910101-001009 | 01.2021 17
Technical Specifications - Spin Klin
TM
Nova Plus
General data
3” Spin Klin
TM
Nova
PLUS
Single
4” Spin Klin
TM
Nova
PLUS
Single
6” Spin Klin
TM
Nova
PLUS
Dual
8” Spin Klin TM
Nova PLUS
Trio
Max. flow rate (130μ)* 80 m
3
/h (352 gpm) 110 m
3
/h (484 gpm) 220 m3/h (968 gpm) 330 m
3
/h (1,452
gpm)
Min. operating pressure when
cleaning
1.5 bar (22 psi)
Max. operating pressure 10 bar
(145psi)
Operating temperature 5-60°C
Filtration area 5,240 cm 2 (383 in 2 ) 5,240 cm 2 (383 in 2 ) 10,480 cm 2 (1,624 in 2 ) 15,720 cm 2 (2,437
in
2
)
Inlet/Outlet diameter
3” (90 mm)
Grooved coupling /
Universal flange
4” (100 mm)
Grooved coupling /
Universal flange
6” (150 mm)
Universal flange
8” (200 mm)
Universal flange
Weight (empty) 57 kg (126 lb) 58 kg (129 lb) 127 kg (279 lb) 182 kg (401 lb)
* Consult Amiad for optimum flow depending on filtration degree and water quality.
ELECTRONIC CONTROL (ADI-P, SINGLE UNITS ONLY) ELECTRONIC CONTROL (ADI-X)
Control power supply
4 x AA type 1.5V batteries / External 7-
14V DC Control power supply
4 x D type 1.5V batteries /
External 7-14 VDC
Solenoid operation data 9-12 V DC latching solenoid Solenoid operation data 9-12 V DC latching solenoid
DP switch Integral sensors DP switch Integral sensors
FLUSHING DATA (AT 1.5 BAR, 22 PSI) CONSTRUCTION MATERIALS
Exhaust valve 3” (80 mm) Grooved coupling Filter housing and lid RPA (Reinforced Polyamide)
Flushing time 18 sec Discs PP (Polypropylene) or PA
(Polyamide)
Reject water volume per flush
cycle
65 liters (17.2 gallons) Cleaning mechanism All-polymeric
Flushing flow rate 13 m3/h (57.2 gpm) Exhaust valve All-polymeric
Exhaust valve
Seals
Seals
When the pressure on downstream is over 6 bar during backwash, installing an orifice
valve in the drain manifold is recommended
to prevent damage to the SK spines.
Flow Rate (130 micron)
3” Single PLUS 4” Single PLUS 6” Dual PLUS 8” Trio PLUS
m³/h gpm m³/h gpm m³/h gpm m³/h gpm
W
a
te
r Qu
a
lit
y
GOOD
80 352 110 484 220 968 330 1,452
AVERAGE
60 264 90 396 180 792 270 1,188
POOR
55 242 80 352 160 704 240 1,056
VERY POOR
50 220 70 308 140 616 210 924
Availability of disc type and micron size
Micron 10
20 40 55 70 100 130 200
400
PP / PA (Nylon) 4 ”
Discs
N/A PP PP, PA PP, PA N/A PP PP PP PP
CCM
Clogging
W
a
te
r Qu
a
lit
y
GOOD
>15
AVERAGE
5 - 15
POOR
2.5 - 5
VERY POOR
1.5 - 2.5