Amiad Water Systems - ADI-X IOM 910101-001180 / 06.2021
63
5.3
ADI-X Controller Parameters Setting
ADI-X Controller parameters can be set via
ADI-X Desktop
application,
ADI-X Mobile
application,
and
ADI-BLE Mobile
application. See the list of settings and their description in Appendix A. "ADI-X
Access to the Technician Settings requires a 4-digit code: “1234”.
The Technician Settings contain the system’s basic and fundamental settings.
Do not change any of these settings if you are not fully familiar with the specific filtration system,
filter type, and controller. Incorrect settings may lead to nonoperational system.
To set the controller parameters using
ADI-X Desktop
application:
1.
Open
ADI-X Desktop
application. Sign in with your email and password if needed.
2.
Go to "Sites" tab in left menu and select the site where you want to set parameters.
3.
Go to "Settings" tab. Here you can set parameters.
Figure 51: ADI-X Desktop application. Sites screen, Settings tab
4.
Enter the 4-digit code (1234) and click “SUBMIT” to enter the Technician Settings.
Notice: Do not change any of these settings if you are not fully familiar with the specific
filtration system, filter type, and controller. Incorrect settings may lead to nonoperational
system.
5.
Make sure to click “Save” after changing any of the settings.
