ADI-P
910101-000992 / 0
5.20 0
2
Page 13 of 21
Low Temperature
Threshold
Freezing Protection - Temperature setpoint to start filter flushing. Default: 4°c
Protecting Flushing
Interval
Freezing Protection - Flushing Interval while freezing protection Is activated. Default: 60 min
Important note: make sure to press SAVE after changing any of the above technician settings.
Additional Settings screens:
Export Data
This screen allows
the user to export the controller’s data (as an Excel file). The screen displays a
list of supported applications for exporting the data (depending on the applications already
installed on the user’s smartphone.
Restore to Filter Type
Settings
Allows
the user to reset the controller’s data and
restore the default parameters for the current
filter type which is controlled by this controller.
Restore to Factory
Settings
Allows the user to delete all of the
controller’s data and
restore the factory default settings; The
default filter model will be according to the filter provided with the controller, or according to the
customer's initial settings.
Delete
Allows the user to delete a site from the smartphone.
Download and Export Reports
In addition to the on-screen reports, the ADI-P is capable of logging, storing, downloading and exporting status and
operation data through the user's smartphone.
1.
Enter the "Export Data" section of the Settings Screen; In order to make sure that the system exports the
latest data, refresh the screen (slide your finger along the screen from top to bottom).
2.
Depending on the general communication applications installed on your smartphone, the ADI-P application
displays the various options for sending the reports.
3.
Select the preferred application, the recipient and send the reports.
4.
ADI-P sends 5 reports in CVS file format (Excel):
system-id
,
parameters-setup
,
flush-events
,
alarm-events
and
params-setup-audit
.
