AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 1 of 16
AMG3788BRN-DR-SF Instruction
Sheet D18172-02.doc
AMG3788BRN-DR-SF
Instruction Manual
8 Channel Video Receive Unit with up to 9 Bi-directional
Data and Audio Channels and Dual Redundant Operation -
includes AMG NMS Network Management Interface
The
AMG3788BRN-DR-SF
is a rackmount eight channel video receive unit designed to receive up to
8 video signals from a single fibre optical fibre ring with Dual Redundant operation. It also provides 9
bi-directional data/audio channels via a low speed data interface. Eight of the data/audio channel
interfaces, whether RS-232, RS-422, RS-485, 20mA, TTL, Contact Closure, Lonworks or Audio, are
defined at manufacture by the addition of daughter boards fitted onto the Data Expansion Board B.
The
AMG3788BRN-DR-SF
is designed to plug into an AMG2009 or AMG2015 subrack, which in turn
fits into a 19" rack system. It also includes an AMG Management Interface to allow Management of the
system using the AMG SNMP enabled Management software.
The
AMG3788BRN-DR-SF
is designed to operate with up to eight
AMG3713Bx-DR-SF
single
channel video insert units. Each receiver will 'drop off' up to eight video channels which are being
transmitted around the fibre ring. The
AMG3788BRN-DR-SF
may also be used with other
combinations of single, dual or four channel video and data insert units.