AMG3788BERN-DR
Instruction Manual
8 Channel Video Receive Unit with up to 9 Bi-directional
Data / Audio Channels plus Ethernet for a Dual Redundant
fibre ring - includes AMG NMS Network Management
Interface
The
AMG3788BERN-DR
is a rackmount eight channel video receive unit designed to receive up to 8
video signals from a dual fibre optical fibre ring with Dual Redundant operation. It also provides 9
bi-directional data/audio channels via a low speed data interface, plus full duplex 100BaseT Ethernet
connectivity around the ring. Eight of the data/audio channel interfaces, whether RS-232, RS-422,
RS-485, 20mA, TTL, Contact Closure, Lonworks or Audio, are defined at manufacture by the addition
of daughter boards fitted onto the Data Expansion Board B.
The
AMG3788BERN-DR
is designed to plug into an AMG2005 subrack, which in turn fits into a 19"
rack system. It also includes an AMG Management Interface to allow Management of the system using
the AMG SNMP enabled Management software.
The
AMG3788BERN-DR
is designed to operate with up to eight
AMG3717BE-DR
single channel
video insert units. Each receiver will 'drop off' up to eight video channels which are being transmitted
around the fibre ring. The
AMG3788BERN-DR
may also be used with other combinations of single,
dual or four channel video and data insert units.
AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 1 of 18
AMG3788BERN-DR Instruction Sheet
D16870.doc
issue 01
