Ametek Western Research IPS-4, User Manual

Page: 141 / 238

Maintenance and Troubleshooting | 5-1
MAINTENANCE and TROUBLESHOOTING
The Maintenance and Troubleshooting chapter discusses preventive
maintenance to keep the analyzer system operating at peak efficiency,
how to check for plugging in the analyzer sample system, and how to
replace internal parts. This chapter also discusses how to view alarm mes-
sages to diagnose and troubleshoot problems with the analyzer.
Safety Considerations
Before working on the analyzer, read the entire procedure you
will be performing to understand how to safely perform mainte-
nance on and troubleshoot the analyzer.
Before performing any maintenance, service, or troubleshooting on
the analyzer, review and follow all safety information in this chapter
and under “Personnel and Equipment Safety Information” following
the Table of Contents. This information describes procedures to follow
to avoid personal injury and/or damage to the equipment. All regula-
tory agency and personnel safety procedures for your jurisdic-
tion must be followed.
Personnel should be thoroughly familiar with the operation of the
analyzer before performing the maintenance procedures described in
this chapter.
To prevent an explosion, test the area around the analyzer for flamma-
ble gases and proceed with maintenance only when the area is found
to be safe (nonhazardous).

NOTE
!
WARNING
!
WARNING